Des Moines Garage Wiring

Des Moines Garage Wiring

  • Electrical
Des Moines Garage Wiring

Looking for Des Moines garage wiring services? If you’re living in an older home or have rental properties that are more than ten years old, you may be faced with aging electrical wiring and services. Determining how and what to upgrade can be challenging at best, especially if you’re not familiar with rewiring options and requirements. In general, electrical work should only be performed by licensed contractors, but it’s important to have a solid baseline understanding of the options available for rewiring your home, or, in the case of our most recent rewiring job in Des Moines, your garage.

Why Rewire Your Garage?

Many years ago, having around 60 amps of electricity was considered to be plenty for a “modern” home. Today’s energy demands are much greater, and can put a significant strain on an aging electrical system. According to experts, anything less than 100 amps is unlikely to provide the electrical service needed by today’s standards, but most homes today are outfitted with up to 200 amps to allow room for growth. Bottom line: don’t wait for electrical outages or flying sparks from your Des Moines garage wiring to decide to have a professional review your system. Instead, be proactive about electrical maintenance and save yourself time and money.

If you are looking to modernize your garage and upgrade it to a more usable space, rewiring may be the first necessary step. Many old homes were built using knob and tube wiring, which is no longer up to building safety codes. So even if the electrical wiring inside your home has been updated recently, your garage power system may still be outdated. Integra Electrical provides outstanding rewiring services including Des Moines garage wiring so you can make the most of your garage space.

This Des Moines garage wiring project required the installation of seven new circuits in order to accommodate the homeowner’s updates. With the new circuits installed by the team here at Integra, they were able to safely install several new lighting fixtures to make the garage a usable workspace, even at night. They will also now be able to safely install an electric vehicle home charging station in the future without the need for any additional upgrades.

To even further optimize this Des Moines garage’s functionality, we wired and installed a double switch to operate their new lighting. No more fumbling around in the dark looking for lamps, tripping over extension cords or trying to track down a pull string for this family.

Rewiring Options

Rewiring a building carries a lot of challenges: ensuring that you have the correct electrical services to the building without ripping up walls, floors or installed decorations being the first big hurdle. That said, there are still big benefits to be found by rewiring your home, such as lowered reliance on dangerous electrical practices such as multiple power strips and extension cords or damage to sensitive electronics due to power surges or drop-offs. There are a few options when you’re considering a major electrical service upgrade: rewiring your entire home and/or garage (big dollars!) or upgrading specific parts such as your electrical service panel — a much more cost-effective option if it will work for your home.

  • Updating your electrical panel is another option that may help get your system back up to standards. While this is the first step in any rewiring project, it’s possible that this step may be enough to keep your home safe and effectively utilize the power you have available for quite some time. This is a good option when funds or time are limited, or when you don’t feel you’re quite up to the major project of rewiring your garage. Replacing circuit breakers and electrical panels may not completely solve your electrical challenges, but they could potentially reduce them. It’s important to note that this step doesn’t fix faulty wiring, it simply provides your home with more power to be distributed throughout the current electrical structure that you have in place.
  • Rewiring your home is the best option to consider if your home or garage is greater than 40 years old. Wiring was significantly different around that time, and not only are you dealing with standards that may not quite be up to snuff, but the general decay of the wiring itself over time increasingly becomes a factor. The unfortunate fact is that electrical wiring is inside your walls, and getting to it is not easy at all. Switches often have to be replaced, you’ll need new wires, outlets, fixtures — and then the cost of any repair and repainting that’s required — altogether can cost from $5,000 to $8,000 for homes of an average size. That number shoots up significantly if you’re dealing with a larger home that has any type of restricted access to the Des Moines garage wiring, or special wiring requirements such as for an indoor swimming pool or theater setup.

Standard Requirements For Des Moines Garage Wiring & Rewiring

Staying within recommended specs can be complicated, but there are certain simple items to keep in mind when you’re considering a rewiring project.

  • Circuits in the kitchen and dining room should be a higher output 20 amp circuit, because they are more likely to draw additional current
  • When they’re not present, add a GFCI (ground fault circuit interrupter) to any outlets that are near a water source
  • Match your numbers: a 15 amp fuse should only be used with a 15 amp cable. A mismatch between wiring and circuit breakers is a recipe for disaster

Garages, especially unfinished ones, can be susceptible to damage from the harsh weather elements. Although this homeowner will be insulating and finishing their garage in the near future, the expert electricians on site from Integra still went ahead and installed electrical metallic tubing (EMT) to protect this Des Moines garage wiring to ensure the safety of not just the garage, but the people inside of it. EMT  is made from heavy-duty galvanized steel to protect the wires threaded through it from magnetic fields, weather damage and contortion.

Electrical Hazard Warning Signs

Keep your home safe and worry-free by knowing the warning signs that can occur when your Des Moines garage wiring is no longer safe. Trained electricians can spot subtle signs, but diligent homeowners can be on the lookout for these potential problems.

  • Circuit breakers that trip unexpectedly and often
  • Lights that flicker or dim
  • Buzzing sound from lamps, or a slight shock when you’re turning on appliances
  • Char marks on electrical outlets, or outlets that are warm to the touch
  • Lack of ground fault indicators where needed (kitchens, bathrooms — anywhere you find water)
  • Frayed wires or damaged and visible insulation
  • The smell of burning vinyl or plastic in various places throughout your home

Of course, it’s important to know that the most common cause of faulty Des Moines garage wiring is when homeowners attempt to make changes themselves instead of working with qualified and trained professionals. It’s critical to ensure that any individual that you hire to work on your home and garage’s electrical systems is fully licensed.

Lifespan of Electrical Systems

The good news is that even though it can be challenging to get through a rewiring project, once you do complete it you should be set literally for life. The rating for most copper wiring is around 100 years with the proper installation. Environmental conditions such as temperature and humidity may also play a part in determining the usable life of your electrical system. In unusually warm areas, it’s not unusual for wiring to fail early simply due to the failure of the insulation protecting the wires themselves. Service panels generally have a 10-year to lifetime warranty, but should be reviewed more often for overall fitness.

Keeping your electrical systems up to date is an important part of home ownership. Waiting for your Des Moines garage wiring to go bad or have problems before you take action can cause some serious damage — not only to your home and property, but also potentially to your life. When it comes to electrical systems, it is always safest to have a licensed professional electrician on call for answers. That’s why Integra Electrical is available to help you at all hours of the day and night in the event that you ever need 24/7 emergency service.

Call Integra Today For Des Moines Garage Wiring

Read Our Reviews On Google

Our team of expert electricians are standing by now for help with all your Des Moines garage wiring needs! Older homes and their garages may not have enough circuits to accommodate the modern lifestyle and all the electronics that come along with it. If you are looking to utilize your garage with lighting and other electronics, you may require rewiring in order to guarantee its safety. Knob and tube wiring no longer complies with modern building safety codes, and may jeopardize the safety of not only your electronic system, but also your family if you overload it. When in doubt, call a licensed, professional electrician to upgrade or review your electrical wires.  Call our office today and see why local homeowners trust their electrical systems to Integra!

Electrical Outlet Upgrades In Des Moines


Contact Us

Circuit Installation In Carlisle

Circuit Installation In Carlisle

  • Electrical
Circuit Installation In Carlisle

Looking for circuit installation in Carlisle to bring adequate power to your Iowa home?  When circuit breakers become overloaded, they shut off as a safety mechanism. If yours are tripping regularly, there is an issue that needs to be addressed by an electrician. Short circuiting  can occur within your electrical wiring when there is a low current connection between your fuse box and the device you want to power on. For example, if there is something wrong with the wires that are connecting everything, they might “short” out. The coating on the wire could be worn away, or broken from the breaker to the outlet. Even small animals in the rodent family sometimes chew through electrical wires in your walls. This is usually a problem that needs to be looked at by an electrician because sparks or fire can occur.  Read on to see the progress of a recent circuit installation completed by the experts at Integra Electrical.

30 AMP Circuit Installation in Carlisle

We made the decision to install a 30 amp circuit to this Carlisle home’s electrical panel so their living room and dining room could have adequate power. They were previously unable to use their dining room light while several of their kitchen appliances were running. We also installed a three-way switch to allow the ceiling fan/light fixture in the dining room to be controlled by switches at both the kitchen and the hallway entrances.

20 AMP Circuit Installation in Carlisle

The 20 amp circuit installed by Integra Electrical will power the kitchen and hallway lighting. These homeowners will no longer need to decide between which light they want to run – they can now see their walking paths clearly at all times, regardless of the time of day. Their bedroom ceiling fan was upgraded to a sleeker, more modern model to give the room an easy update.

Electrical Switch Troubleshooting & Replacement

Our team was able to improve the usability of this home’s newly updated lighting systems by not only installing new switches, but by troubleshooting and replacing their faulty existing ones.  If nothing is plugged into the outlet or there aren’t too many items stressing the electrical supply, it’s perfectly normal for it to be a tad warm. The lights tend to do that in a house. In general if it’s too hot to touch, that’s a serious problem. Damaged wires can cause excessive heat on regular switch plates.

Call Integra Today For Circuit Installation In Carlisle

Read Our Reviews On Google

Our team of expert electricians are standing by in Carlisle now for help with all your home’s panel upgrade and circuit installation needs! Circuit breakers prevent your circuits from getting overloaded. As the electricity being drawn from a particular circuit begins to reach 100% capacity, the circuit will shut off to protect the electrical wiring in your home. Older homes may not have enough circuits to accommodate the modern lifestyle and all the electronics that come along with it. When in doubt, call a licensed, professional electrician to upgrade or review your circuit panels.  Call our office today and see why local homeowners trust their electrical systems to Integra!

Electrical Outlet Upgrades In Des Moines


7 Signs You Should Upgrade Your Circuit Breaker

7 Signs You Should Upgrade Your Circuit Breaker

  • Electrical

A circuit breaker is a key part of any safe electrical system. Their job is to shut off the circuit if something goes wrong, protecting the system from a short circuit or overload. However, like every other part of your home, it’ll get worn down and eventually need an upgrade. But how do you know when your circuit breaker needs an upgrade? Integra Electrical can help you recognize when you should arrange for a circuit breaker upgrade in your Iowa home.

Here are seven signs you need to get a circuit breaker upgrade:


Still using fuses

Older homes may still use fuses to protect against short circuits. Homes used circuit breakers back in the day when we used a lot less electricity. This means that fuses generally can’t handle as much electricity as a circuit breaker and should be upgraded.


Heated components

When you touch any part of your electrical panel, it should all be around the same non-descript temperature. However, failing circuits can make the area around them hot to the touch. If you notice any heat from a tripped circuit breaker, call an emergency electrician before you reset the breaker.


Resetting troubles

Like generic light switches, circuit breaker switches have two options: on and off. When resetting a circuit, you simply have to flick the switch back on. However, if there’s a problem, it might flick back immediately, stay in the center, or refuse to budge from the off position. Any of these occurrences should have you calling an electrician.


Inexplicable tripping

Circuit breakers often trip when the electrical load becomes too great for their circuit. However, sometimes they might trip when they have a completely safe load. These kinds of trips hint that you have a bad breaker.


Frequent tripping

An obvious sign that your circuit breaker needs upgrading is if it trips up frequently. When specific circuits are tripping frequently, that may be a sign of a bigger issue. You should consult with one of our electricians to find out what the exact issue is.


Evidence of electrical fires

Improperly grounded or contained electricity can make sparks fly as electricity jumps between components. If this is causing your circuit breaker to trip, you might notice singe marks on your breaker or acrid smells. Hold off on resetting the circuits and call us to take a look.


Old or damaged wiring

Old or damaged wiring tends to cause problems with any electronics they’re connected to. Lights can flicker, plugging in appliances may result in an electric shock, and you might smell burning around your appliances. All of these are signs you should call a professional before your home is seriously damaged. It may be a good idea to ask about rewiring.


Why call Integra to work on my electricity?

Electrical systems may be complicated—but that doesn’t mean electrical service has to be. When you call on our Integra professionals, we keep things simple by providing superior service at a price that you can feel good about. At Integra Electrical, we believe that affordability and safety should never be compromised. Bridging the gap between fair prices and valued service, we provide the consistent and customized solutions that Central Iowa homeowners and businesses deserve. We believe there’s more to business than making a profit. We are a value-driven business dedicated to delivering honesty, integrity, and exceptional service. People first, we commit to providing for you, our customers, our employees, and our community. You deserve the comfort of knowing we’re available whenever you need us. Someone is always answering our phones 24 hours a day, 365 days a year. Call Integra today to schedule your circuit breaker upgrade!


Why is my Circuit Breaker Tripping in Iowa?

Why is my Circuit Breaker Tripping in Iowa?

  • Electrical
circuit breaker tripping in Iowa by Integra

Circuit breakers are automatic switches that protect circuits from damage when it detects a fault. Located in your property’s electrical panel, each circuit breaker allows electricity to run in certain parts of the property. When a circuit breaker detects amperage above its maximum, it’ll automatically turn off to protect your circuits. They’re a direct upgrade to fuse boxes. With fuses, they’ll burn out and need replacing, but circuit breakers are reusable.  In general, there are three reasons you’ll have a circuit breaker tripping in Iowa.

Here are three reasons you’ll likely see circuit breaker tripping in Iowa:


Circuit overload

Circuits can become overloaded when an electrical wire or circuit receives more amperage than it’s supposed to handle. They can also be caused by loose or corroded wires or connections. To determine the problem, unplug everything the circuit is connected to before resetting it. After giving it a few minutes of rest, plug in and turn on items one by one until you find what caused the overload. If circuit overloads keep happening, you might need to install a new dedicated circuit and outlet for the area.


Short circuit

Short circuits occur when an active/hot electrical wire touches a neutral wire, causing a large amount of current to overrun the circuit. There are a lot of other reasons they can happen, including loose connections, a slipped wire, or animals chewing on the wires. Short circuits are easy to notice as it can cause sparking noises, sparks, or smoke to come from the fuse box. They can also be dangerous because the high temperature they generate can be a fire hazard. If you can’t find the source yourself, call a qualified electrician.


Ground fault

Ground faults happen for a variety of reasons. These include when an active/hot wire touches the ground wire, a grounded portion of the junction box, or a grounded area of an appliance. Many parts of the home are required by the National Electrical Code (NEC) to be protected by Ground Fault Circuit Interrupters (GFCI) in order to prevent electrical shocks and fires. Ground faults tend to happen when equipment is or defective or broken.


What makes Integra Electrical local experts at electrical systems?

Integra Electrical has been working with Iowa residents for over a decade to keep their electrical systems working. Our company puts people first by offering high-quality service at affordable prices. We provide the simple yet effective solutions that Central Iowa homeowners deserve. Our phones are available 24/7, so call Integra Electrical today for all of your electrical needs!